loading
reading
writing
saving
searching
Triumph TR6 TR250 Rocker Panel End Caps (5) - $20 (Pinckney/Brighton)
condition:
new
make / manufacturer:
The Roadster Factory
QR Code Link to This Post
New aftermarket Rocker Panel End Caps from The Roadster Factory.
Parts are new and requires removing original spot welds from the body. Then either Plug Weld or Spot Weld in place when all is aligned properly.
This part is usually severely rusted as it is open to the front and rear wheel and tire assembly. This allows you to correctly mount the Rocker Panel on TR6 and TR250.
!!! Please Be Aware that there are 4 in Self Etching Primer and one spare in bare steel. !!!
THERE ARE 2 EACH FOR FRONT AND REAR POSITIONS.
!!! Also Note that these are what you receive if originally purchased from "The Roadster Factory", Moss Motors, Victoria British (purchased by Moss). THEY MUST BE MASSAGED/MODIFIED WITH HAMMER AND DOLLY OR CUT OFF SAW TO FIT. I HAVE DONE MANY FRAME OFF'S GROUND UP RESTORATIONS ON TR6 AND TR250'S AND YES THEY FIT BUT NEED TO BE FITTED TO THE APPLICATION. EVERY ONE I HAVE PURCHASED ARE LIKE THIS BUT THEY WILL FIT.!!!
CONTACT ME IF YOU HAVE ANY QUESTIONS
Price is $20 Cash