Vintage Infinity Q3 stereo speakers in very good condition. All drivers are original, the crossovers were rebuilt, mid-woofer, mid and tweeter pots were restored. The cabinets were sanded, re-stained and oiled. The grille frames restored and the original grille screens (with badges) are in excellent condition. Needless to say - these speakers sound amazing. A factory recommendation of 60 to 250 Watts for amplifier power is accurate but the amplifier absolutely must be a high current capable amp.The easiest way to determine if you have a high current amp is, as an example, if at an impedance of 8 Ohms, the amp puts out 100 Watts - and at 4 Ohms, the amp puts out 200 Watts, or any doubling of the output power when halving the impedance. The Watkins woofers in these speakers have a dual 2 Ohm and 4 Ohm voice coil. This means that when lower frequencies are reproduced the amp will work much harder than it has to at 8 Ohms or 4 Ohms. An appropriate amplifier is mandatory. These speakers are rated at 4 Ohms (nominal) so an amp capable of 4 ohms should be considered the starting point. A little to "chew on" but the result is quite impressive. These speakers have a frequency response of 28Hz to 32kHz - and are more than enough for a small to large sized room. These speakers can be auditioned before purchase and if you have any questions please feel free to contact me. Restoration pics are available to view during audition. They are heavy and will generally require two people to move them. Please call as opposed to text for a prompt response.